ULTRON 3 – STROKE 4.7MM
BLAD BLAD Ultron 3 is a wireless tattoo pen equipped with revolutionary stroke control features that reduce skin trauma and introduce pigment under the skin faster. Sharper batting allows you to make dense fills without gaps and create lines in one step.
BLAD BLAD Ultron 3 is equipped with DirectPower an electronic management system that controls the machine and instantly adjusts the operation of the engine maintaining a stable speed and consistent hit.
This makes the hit sharper and eliminates the risk of insufficient skin penetration at low revs.
BLAD BLAD Ultron 3 is equipped with StableHit a beat control system that, regardless of needle size, by the pressure applied to the skin, by the rigidity of the membrane or by the charge of the battery, keeps the frequency constant to get the same intensity of the beat. This allows the pigment to always be inserted under the skin at the same depth.
BLAD BLAD Ultron 3 is equipped with Start&Stop a system based on motion and position sensors that turns on the motor when the machine is picked up and turns off when the machine is placed on the table.
Shutdown is settable a 15 O 30 seconds after placing the pen on the table.
BLAD BLAD Ultron 3 it is made of partially recycled aerospace aluminum for a great commitment to environmental responsibility. The clean design reduces the amount of aluminum needed by almost 50% compared to designs with more imaginative shapes. Also all unnecessary things have been removed from the packaging, including USB-С cables (cable probably already owned and used by other devices).
BLAD BLAD Ultron 3 with Stroke Stroke 4,7 mm offers a dry and decisive stroke, perfect for Linework & Blackwork. Draw large lines quickly and easily. It also allows you to make full color fills without leaving gaps.
BLAD BLAD Ultron 3 it is compatible with all types of classic tattoo cartridges (Zuma, Versus, Cheyenne, Quadron, etc).
See technical characteristics below.
1.277,00€ VAT excl.free shipping!
Out of stock
Main features:
- M3Pro 12.6W motor with flywheel;
- innovative DirectPower engine control unit
- less skin trauma and better healing thanks to StableHit technology;
- fast, crisp lines that won't come out broken or weak after healing;
- fast and solid filling with pigments of any density;
- incredible ergonomics: the most compact wireless pen with the lowest center of gravity;
- intuitive display and optimal location of the control buttons;
- start-stop mode;
- compatible with Cheyenne disposable grips;
- 5-7 hours of operation with the built-in rechargeable battery;
- fast charging with USB-C (15 recharge minutes = 1,5 hours of use);
- eco-friendly packaging and design;
- operating range 30-130 Hz;
- dimensions: Ø31 mm x 132 mm;
- weight: 170 g
Related Products
Out of stock
AVENGER V2 PRO Limited edition
710,00€ VAT excl.free shipping!
VLAD BLAD AVENGER V2 PRO is the ultimate tattoo machine that allows you to have six different strokes available: 3,2 - 3,5 - 3,8 - 4,2 - 4,7 - 5,5 mm. Forget screwdrivers and car reassembly, everything is done without pausing the session and they are just enough 7 seconds thanks to the unique MultiStroke ™ mode change system. The super powerful motor makes this tattoo machine unmatched in its versatility, also thanks to the SkinResponse ™ system it is possible to work softer and more precisely with long strokes and higher tension settings.
- Mode 3.2: for quick and simple gray shades, causing minimal damage and irritation to the skin.
- Mode 3.5: for delicate shades of gray, shades of color and soft colors.
- Mode 3.8: for shades of color and full color, lines of medium and thin thickness, whip shading.
- Mode 4.2: for any solid fill, medium and thick lines, whip shading.
- Mode 4.7: for bold lines and fills using large needles on any area of the skin.
- Mode 5.5: it's a crazy way.. recommended for dot shading and experimental tattoo techniques.
Features:
- It does not require additional lubrication or maintenance
- Adjustable stroke: 3,2 - 3,5 - 3,8 - 4,2 - 4,7 - 5,5 mm
- M2 motor from 10,5 Watt
- Morsa Super Jaws™
- New durable RCA connector
- Weight: 125gr
This version of the VLAD BLAD AVENGER V2 PRO features both a durable RCA connection and gold-plated steel clip cord clamps.
Recommended settings:
Fine lines:
- Volts:7.5 - 8.5 V
- Mode: 3.5 - 4.7
Bold lines:
- Volts: 9 - 9.3 V
- Mode: 4.2 - 4.7
B&G Soft shading:
- Volts: 7.5 - 7.8 V
- Mode: 3.2
Color / Soft shading:
- Volts: 7.5 - 8 V
- Mode: 3.5 - 3.8
Solid color:
- Volts: 7.5 - 8 V
- Mode: 4.2 - 4.7
Dot shading:
- Volts: 1.5 - 3 V
- Mode: 5.5
Whip shading:
- Volts: 7 - 8 V
- Mode: 3.8 - 4.2
Read more
In stock
AVENGER 3 PRO WIRELESS
1.377,00€ VAT excl.free shipping!
VLAD BLAD AVENGER 3 PRO is the definitive wireless tattoo machine that allows you to have six different strokes available: 3,2 - 3,5 - 3,8 - 4,2 - 4,7 - 5,5 mm. Forget screwdrivers and car reassembly, everything is done without pausing the session and they are just enough 7 seconds thanks to the unique MultiStroke ™ mode change system. The super powerful motor makes this tattoo machine unmatched in its versatility, also thanks to the SkinResponse ™ system it is possible to work softer and more precisely with long strokes and higher tension settings.
Add to cart
- Mode 3.2 (gives 100 a 130 Hz): get great pixel-free shades of gray quickly and easily. Minimal irritation and redness guaranteed.
- Mode 3.5 (gives 85 a 115 Hz): you get delicate shades of gray, uniform color filling and perfect color saturation.
- Mode 3.8 (gives 80 a 110 Hz): ideal for color filling and drawing fine and medium lines with incredibly precise results.
- Mode 4.2 (gives 70 a 110 Hz): advanced mode for fast color filling and drawing medium to large lines; also excellent for whipshading shading.
- Mode 4.7 (gives 60 a 100 Hz): advanced artist mode for super-fast filling of solid colors and drawing large lines; Excellent shading for large aggressive whipshading.
- Mode 5.5 (gives 30 a 70 Hz): the crazy mode for real artists.. to be handled with care!
- MultiStroke: Quick adjustment of the stroke during the session. A powerful flywheel on the engine that stores and then returns energy from the tension of the cartridge diaphragm, improving the sharpness of the shot.
- SkinResponse: an element of the spring-loaded mechanism, which allows slightly extended needle contact under the skin at high speeds and stroke lengths, reducing trauma and increasing pigment density.
- Antigravity: magnets within the system that work against the resistance of the cartridge membrane, making each stroke slightly sharper and injecting more pigment.
- DirectPower: an advanced engine control unit that guarantees power.
- StableHit: a system that detects the smallest changes in needle pressure and instantly adjusts engine speed, preventing speed drops on difficult skin areas when using larger needles.
- Start-stop: turns the engine on and off, detecting your movements.
- Smart Charge: when the battery is empty, recharges quickly (15 minutes of charging provide about an hour and a half of work). When the battery is at 80%, switch to a slower charging mode, prolonging battery life.
In stock
ULTRON 3 – STROKE 4.2MM
1.277,00€ VAT excl.free shipping!
BLAD BLAD Ultron 3 is a wireless tattoo pen equipped with revolutionary stroke control features that reduce skin trauma and introduce pigment under the skin faster. Sharper batting allows you to make dense fills without gaps and create lines in one step.
BLAD BLAD Ultron 3 is equipped with DirectPower an electronic management system that controls the machine and instantly adjusts the operation of the engine maintaining a stable speed and consistent hit.
This makes the hit sharper and eliminates the risk of insufficient skin penetration at low revs.
BLAD BLAD Ultron 3 is equipped with StableHit a beat control system that, regardless of needle size, by the pressure applied to the skin, by the rigidity of the membrane or by the charge of the battery, keeps the frequency constant to get the same intensity of the beat. This allows the pigment to always be inserted under the skin at the same depth.
BLAD BLAD Ultron 3 is equipped with Start&Stop a system based on motion and position sensors that turns on the motor when the machine is picked up and turns off when the machine is placed on the table.
Shutdown is settable a 15 O 30 seconds after placing the pen on the table.
BLAD BLAD Ultron 3 it is made of partially recycled aerospace aluminum for a great commitment to environmental responsibility. The clean design reduces the amount of aluminum needed by almost 50% compared to designs with more imaginative shapes. Also all unnecessary things have been removed from the packaging, including USB-С cables (cable probably already owned and used by other devices).
BLAD BLAD Ultron 3 with Stroke Stroke 4,2 mm offers maximum versatility. Allows you to draw any line, both thin and thick. It is also excellent both for making soft color gradients and for full color fills.
BLAD BLAD Ultron 3 it is compatible with all types of classic tattoo cartridges (Zuma, Versus, Cheyenne, Quadron, etc).
See technical characteristics below.
Add to cart
Out of stock
AVENGER V2 PRO
640,00€ VAT excl.free shipping!
VLAD BLAD AVENGER V2 PRO is the ultimate tattoo machine that allows you to have six different strokes available: 3,2 - 3,5 - 3,8 - 4,2 - 4,7 - 5,5 mm. Forget screwdrivers and car reassembly, everything is done without pausing the session and they are just enough 7 seconds thanks to the unique MultiStroke ™ mode change system. The super powerful motor makes this tattoo machine unmatched in its versatility, also thanks to the SkinResponse ™ system it is possible to work softer and more precisely with long strokes and higher tension settings.
- Mode 3.2: for quick and simple gray shades, causing minimal damage and irritation to the skin.
- Mode 3.5: for delicate shades of gray, shades of color and soft colors.
- Mode 3.8: for shades of color and full color, lines of medium and thin thickness, whip shading.
- Mode 4.2: for any solid fill, medium and thick lines, whip shading.
- Mode 4.7: for bold lines and fills using large needles on any area of the skin.
- Mode 5.5: it's a crazy way.. recommended for dot shading and experimental tattoo techniques.
Features:
- It does not require additional lubrication or maintenance
- Adjustable stroke: 3,2 - 3,5 - 3,8 - 4,2 - 4,7 - 5,5 mm
- M2 motor from 10,5 Watt
- Morsa Super Jaws™
- New durable RCA connector
- Weight: 125also thanks to the SkinResponse ™ system it is possible to work softer and more precisely with long strokes and higher tension settings:
Fine lines:
- Volts:7.5 - 8.5 V
- Mode: 3.5 - 4.7
Bold lines:
- Volts: 9 - 9.3 V
- Mode: 4.2 - 4.7
B&G Soft shading:
- Volts: 7.5 - 7.8 V
- Mode: 3.2
Color / Soft shading:
- Volts: 7.5 - 8 V
- Mode: 3.5 - 3.8
Solid color:
- Volts: 7.5 - 8 V
- Mode: 4.2 - 4.7
Dot shading:
- Volts: 1.5 - 3 V
- Mode: 5.5
Whip shading:
- Volts: 7 - 8 V
- Mode: 3.8 - 4.2
Read more
In stock
ULTRON 3 – STROKE 3.7MM
1.277,00€ VAT excl.free shipping!
BLAD BLAD Ultron 3 is a wireless tattoo pen equipped with revolutionary stroke control features that reduce skin trauma and introduce pigment under the skin faster. Sharper batting allows you to make dense fills without gaps and create lines in one step.
BLAD BLAD Ultron 3 is equipped with DirectPower an electronic management system that controls the machine and instantly adjusts the operation of the engine maintaining a stable speed and consistent hit.
This makes the hit sharper and eliminates the risk of insufficient skin penetration at low revs.
BLAD BLAD Ultron 3 is equipped with StableHit a beat control system that, regardless of needle size, by the pressure applied to the skin, by the rigidity of the membrane or by the charge of the battery, keeps the frequency constant to get the same intensity of the beat. This allows the pigment to always be inserted under the skin at the same depth.
BLAD BLAD Ultron 3 is equipped with Start&Stop a system based on motion and position sensors that turns on the motor when the machine is picked up and turns off when the machine is placed on the table.
Shutdown is settable a 15 O 30 seconds after placing the pen on the table.
BLAD BLAD Ultron 3 it is made of partially recycled aerospace aluminum for a great commitment to environmental responsibility. The clean design reduces the amount of aluminum needed by almost 50% compared to designs with more imaginative shapes. Also all unnecessary things have been removed from the packaging, including USB-С cables (cable probably already owned and used by other devices).
BLAD BLAD Ultron 3 with Stroke Stroke 4,2 mm offers maximum versatility. Allows you to draw any line, both thin and thick. It is also excellent both for making soft color gradients and for full color fills.
BLAD BLAD Ultron 3 it is compatible with all types of classic tattoo cartridges (Zuma, Versus, Cheyenne, Quadron, etc).
See technical characteristics below.
Add to cart