Stampante Thermal Imager V2

The Thermal Imager V2 printer is perfect for creating tattoo stencils quickly. The printer, thanks to its 1350Watt, guarantees efficient and reliable performance. E’ You can manually control the speed at which sheets enter the printer. A high speed creates brighter copies while a slower speed creates much darker copies. For best results, it is recommended to set the speed between 6.5 e 8, always depending on the type of drawing and type of paper used.

The Thermal Imager V2 printer has a dual ventilation system and a sensor to control the heating and cooling process, as well as an automatic system to prevent overheating. We strongly recommend that you use this printer with a carrier sheet for thermal printers to keep the Thermal Imager V2 printer clean and jam-free, and to use high-quality paper such as SPIRIT ReproFX Thermal o la S8 Red Thermal Paper to always get the best results.

After about 10 prints, the machine will switch to cooling mode for approx 15 minutes, during this phase the thermal printer must not be switched off as long as the roller is still in motion.